User Manual Q&AAnswer
Apr 23, 2025 - 02:55 AM
1. Before starting the installation, please ensure that you have read and understood all the instructions provided in the manual.
2. Begin by removing the original hand protectors from your BMW motorcycle. This may involve removing screws or other fasteners.
3. Take the TOURATECH spoiler and align it with the mounting holes on the handlebars of your motorcycle.
4. Insert the provided screws through the mounting holes on the spoiler and into the corresponding holes on the handlebars.
5. Tighten the screws securely, but be careful not to overtighten and damage the spoiler or handlebars.
6. Repeat the process for the other side of the motorcycle, ensuring that the spoiler is aligned properly.
7. Once both spoilers are securely attached, check that they are positioned correctly and do not interfere with the movement of the handlebars or any other components.
8. After installation, it is recommended to check and tighten all bolted connections after riding approximately 50 km.
Please note that these instructions are a general guide and may vary depending on the specific model and year of your BMW motorcycle. Always refer to the provided manual for the most accurate and up-to-date instructions for your particular product.
Add New Comment