How do I assemble the Comfort Zone High Velocity Oscillating Pedestal Fan? (Comfort Zone High Velocity Oscillating Pedestal Fan User Guide)

Answer

manuals.plus

Apr 23, 2025 - 02:30 AM

Sure! Here are the step-by-step instructions for assembling the Comfort Zone CZHVP18EX Series 18 Inch High Velocity Oscillating Pedestal Fan:

Step 1: Assemble the Extension Pole onto the Base by inserting four 2-1/2" bolts through the openings.

Step 2: Using the washers and nuts provided, tighten the Extension Pole to the Base.

Step 3: Place the decorative Chrome Flange over the Extension Pole to cover the base screws.

Step 4: Note that the pedestal extension pole may be recessed inside the larger pole of the pedestal body. Pull the Extension Pole out.

Step 5: Thread the Extension Pole Nut onto the threads of the Extension Pole.

Step 6: Take the Fan Motor Housing and insert the Extension Pole into it. Tighten the set xxxx securely.

Step 7: Remove the four mounting screws from the Motor Housing where indicated to use for the Rear Grille in Step 8.

Step 8: Assemble the Rear Grille onto the Motor Housing using the screws removed in Step 7. Tighten the four screws securely.

Step 9: Place the Fan Blade onto the Motor Shaft, making sure to align the flat surface on the Motor Shaft. Tighten the set xxxx securely onto the flat surface.

Step 10: Attach the Front Grille to the Rear Grille with the Hook Clip centered on the top above the Wire Handle.

Step 11: Press the remaining Grille Clips onto the Rear Grille to securely attach the Front Grille. Do not operate the fan without the Grille in place.

Please refer to the user manual for any additional information or illustrations that may assist you during the assembly process.