How do I install the Fogatti FOAC Series Rooftop RV Air Conditioner? (Fogatti FOAC Series Rooftop RV Air Conditioner Instruction Manual)

Answer

manuals.plus

Apr 22, 2025 - 11:18 AM

To install the Fogatti FOAC Series Rooftop RV Air Conditioner, please follow the steps outlined in the instruction manual provided. Here is a summary of the installation process:

1. Determine the installation location on the roof of your RV. The air conditioner should be installed horizontally and the roof should be able to support the weight of the unit.

2. Prepare the installation area by removing the roof vent or cutting a new opening if needed. Ensure that there are no obstacles in the installation area and that the distance between the back of the vehicle and other roof equipment is at least 18 inches.

3. Wire the air conditioner according to national electrical codes and industry standards. Use a separate 20 amp Time Delay Fuse or HACR Circuit Breaker for the power supply.

4. Place the air conditioner on the roof using a mechanical crane to lift it. Do not slide the unit to avoid damaging the gasket.

5. Install the air duct and top fixing plate. Select the appropriate air duct sponge based on the thickness from the ceiling to the roof. Paste the air duct sponge on the fixing plate and place it into the roof opening. Secure the fixing plate with long bolts.

6. Connect the wiring of the air conditioner, including the wired controller, power supply, and anti-freeze sensor.

7. Test the air conditioner to ensure it is functioning properly.

For more detailed instructions and diagrams, please refer to the Fogatti FOAC Series Rooftop RV Air Conditioner Instruction Manual. If you have any further questions or need assistance, you can contact Fogatti customer service at 877-216-1818 or service@fogattiliving.com.