User Manual Q&AAnswer
Apr 22, 2025 - 11:10 AM
To connect the ELATEC TWN4 MultiTech 2 BLE reader to a host device, follow these steps:
1. Ensure that the reader is powered up and ready to be connected.
2. Identify the type of communication cable you will be using to connect the reader to the host device (e.g., USB or RS-232).
3. If using a USB cable, connect one end of the cable to the USB port on the reader and the other end to an available USB port on the host device.
4. If using an RS-232 cable, connect one end of the cable to the RS-232 port on the reader and the other end to the corresponding RS-232 port on the host device.
5. Once the reader is connected to the host device, it will automatically detect the type of communication cable and initiate the necessary communication protocols.
6. The reader is now ready to be used with the host device.
Please refer to the "MODE OF OPERATION" section of the user manual for more detailed information on the different modes of operation and the behavior of the reader during normal operation.
Note: It is important to ensure that the power supply requirements and safety precautions mentioned in the are followed during the connection process to avoid any damage to the reader or the host device.
Add New Comment