User Manual Q&AAnswer
Apr 22, 2025 - 10:20 AM
To connect the Flash-Butrym F7100338 LED PAR 56 7x15W RGBWA+UV 6in1 to a DMX controller, you will need a cable with XLR-female to XLR-Male plugs. Connect the XLR-Male plug to the DMX output of your controller and the XLR-female plug to the DMX input of the fixture. Make sure to connect the DMX signal in a daisy-chain configuration, where the DMX output of one fixture is connected to the DMX input of the next fixture in line.
At the last fixture in the chain, you will need to terminate the DMX signal with a terminator. To do this, solder a 120Ω resistor between the signal (-) and signal (+) wires into an XLR plug and plug it into the DMX output of the last fixture. This ensures proper termination of the DMX signal and prevents signal interference.
Please refer to the "Connecting DMX signal" section in the user manual for more detailed instructions and diagrams.
Add New Comment