User Manual Q&AAnswer
Apr 22, 2025 - 09:00 AM
To pair the transmitter to the receiver, follow these steps:
1. Make sure to test the unit before installation.
2. On the ERA-DCRX receiver, hold down the "mode" button until you hear a short tone sound and the "zone 1" LED flashes.
3. If you are programming the transmitter to zone 1, press the gray button on your transmitter. You will hear the receiver play a short musical note (zone 1 will continue to flash).
4. To program a transmitter to a different zone, press the "zone" button on the receiver to scroll to the appropriate zone. The zone you want to program will flash. Repeat step 3 above.
5. Once you have programmed all the zones, move to the next step.
6. To exit program mode, hold down the "mode" button until you hear a short tone sound (approximately 3 seconds).
Please refer to the owner's manual for more detailed instructions and illustrations (Figure 2).
Add New Comment