User Manual Q&AAnswer
Apr 21, 2025 - 09:39 AM
To install the software for the TMD3782 Light To Digital Color Ambient Light Sensor With Proximity Detection, follow these steps:
1. Make sure your PC has one or more USB ports.
2. Insert the flash drive provided with the product into an unused USB port.
3. Double-click the Setup.exe file on the flash drive. Alternatively, you can click Start, then click Run, type "E: setup.exe" (replace "E" with the appropriate drive letter assigned to the flash drive), and press Enter.
4. The Digital Light Sensor Setup Wizard will open and guide you through the installation process. Follow the on-screen instructions (refer to Figures 2 through 8 in the user guide).
5. If you need to re-install the software, run the setup.exe file again. To remove the software from your computer, go to the Windows Control Panel or use the Uninstall option provided in the ams - TMD3782 EVM folder (refer to Figure 9 in the user guide).
For more detailed instructions and troubleshooting, please refer to the User's Guide included in the documents provided with the product.
If you encounter any technical difficulties, you can submit a technical support request through the Tech Support page at http://www.ams.com/Support. Alternatively, you can call (972) 673-0759 (main) from Monday to Friday, 8AM-5PM CST. You may also visit http://www.ams.com to find worldwide local representatives in your area.
Add New Comment