How do I disassemble and recycle the Hypertherm HPR Auto Gas Select? (Hypertherm HPR Auto Gas Select Recycling Instructions Manual)

Answer

manuals.plus

Apr 21, 2025 - 09:13 AM

To disassemble and recycle the Hypertherm HPR Auto Gas Select, follow these steps:

1. Unplug the system from the power outlet and wait five minutes to allow all the stored energy to discharge.

2. Using a T20 TORX driver, remove the bolts and discard them into the mixed metal recycling stream.

3. Using a T20 TORX driver, remove the bolts and discard them into the mixed metal recycling stream.

4. Using a T20 TORX driver and a 5/16 inch socket, remove the bolts and nuts. Discard the bolts and nuts into the mixed metal recycling stream. Discard the PCB into the E-waste recycling stream.

5. Using an 11/32 inch socket and a Phillips screwdriver, remove the nuts and screws. Pull to remove the wires. Discard the nuts, screws, and wires into the mixed metal recycling stream. Discard the PCB into the E-waste recycling stream.

6. (Optional) Discard the wires into the mixed metal recycling stream.

7. Using a 7/16 inch socket, remove the nuts and pull to remove the wires. Discard the nuts and wires into the mixed metal recycling stream.

8. Using a T20 TORX driver and a 1/4 inch socket, remove the bolts and nuts. Discard the bolts and nuts into the mixed metal recycling stream.

9. Using a Phillips screwdriver and an 11/32 inch socket, remove the screws and nuts. Discard the screws and nuts into the mixed metal recycling stream. Discard the PCB into the E-waste recycling stream.

10. Using a Phillips screwdriver and a 1/32 inch socket, remove the screws and nuts. Discard the screws and nuts into the mixed metal recycling stream.

11. Using a 1/4 inch socket and a 7/16 inch socket, remove the nuts. Discard the nuts into the mixed metal recycling stream. Discard the PCB into the E-waste recycling stream.

12. Using a 1/4 inch socket and a 7/16 inch socket, remove the nuts. Recycle the nuts into the mixed metal recycling stream.

Please note that these instructions are for recycling the various components of the Hypertherm HPR Auto Gas Select. Make sure to follow proper safety precautions, such as disconnecting the power and referring to the Safety and Compliance Manual for more information. Additionally, recycling prices may vary based on location and time, so it's advisable to check with your local recycling facility for specific details.