User Manual Q&AAnswer
Apr 21, 2025 - 08:56 AM
To change the frequency on the Gemini GMU Series Wireless Microphone System, please follow these steps:
1. Turn on the power supply of the receiver and transmitter.
2. Make sure the transmitter is turned on.
3. Short press the "SET" button on the transmitter.
4. The frequency will start to change.
5. Release the "SET" button when you reach the desired frequency.
6. The transmitter and receiver will automatically connect to the new frequency.
If you are still having trouble changing the frequency, you can try re-pairing the transmitter and receiver. Here are the steps for re-pairing:
1. Turn on the transmitter and press the "SET" button.
2. While holding down the power button on the transmitter, hold it for 3 seconds until the power light starts flashing.
3. At the same time, turn on the receiver.
4. The frequency indicator on the receiver will start flashing green, indicating it is in pairing mode.
5. Wait for 1-2 seconds for the automatic connection to be successful.
6. The frequency indicator on the receiver will light up green, indicating a successful connection.
Please note that once you have successfully paired the transmitter and receiver, they will automatically connect on future startups.
If you are still experiencing difficulties, it is recommended to refer to the user manual or contact Gemini customer service for further assistance.
Add New Comment