User Manual Q&AAnswer
Apr 19, 2025 - 05:48 AM
To adjust the temperature on the Orbegozo CR 5031, CR 5032 PTC Fan Heater, you need to use the thermostat xxxx (A) located on the appliance. Here are the steps:
1. Make sure the heater is plugged into a power source and turned on.
2. Locate the thermostat xxxx (A) on the heater.
3. Rotate the xxxx clockwise to increase the temperature setting or anti-clockwise to decrease the temperature setting.
4. The heater will automatically switch on when the room temperature falls below the set temperature and turn off when the set temperature is reached.
Note: You can adjust the thermostat during use to maintain a constant room temperature.
Add New Comment