User Manual Q&AAnswer
Apr 19, 2025 - 05:40 AM
To connect the Sonoff 433MHz RF WiFi Bridge Gateway to your Wi-Fi network, follow these steps:
1. Download the "eWeLink" app on your Android or iOS device.
2. Power on the Sonoff device by connecting it to a power source using the Micro USB cable.
3. During the first use, the device will enter quick pairing mode. The Wi-Fi LED indicator will change in a cycle of two short and one long flash.
4. If you want to enter quick pairing mode again, long press the pairing button for about 5 seconds until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
5. Open the "eWeLink" app and tap on the "+" icon to add a device.
6. Select "Quick Pairing" and follow the prompts on the app to complete the pairing process.
7. If you fail to enter quick pairing mode, you can try "Compatible Pairing Mode". Long press the pairing button for 5 seconds until the Wi-Fi LED indicator changes in a cycle of two short flashes and one long flash and release. Then, long press the pairing button for 5 seconds again until the Wi-Fi LED indicator flashes quickly. The device will enter Compatible Pairing Mode.
8. In the app, select "Compatible Pairing Mode" and choose the Wi-Fi SSID with ITEAD-******. Enter the password (default: 12345678) and tap "Next". Wait patiently until the pairing process completes.
Note: Make sure you are using a 2.4GHz Wi-Fi network as the Sonoff device does not support 5GHz networks. Also, ensure that the Wi-Fi password is correct and there is no interference or too much distance between the device and your router.
For more detailed instructions, please refer to the Sonoff 433MHz RF WiFi Bridge Gateway User Manual.
Add New Comment