User Manual Q&AAnswer
Apr 19, 2025 - 05:30 AM
Sure! Here are the step-by-step instructions for installing the Richelieu RCS Series European Style Hinge:
1. Start by determining the position where you want to install the hinge on the door. Use a 1-3/8" (35 mm) drill bit to make a hole 7/16" (11 mm) to 1/2" (13 mm) deep. The hole should be made 1/8" to 1/4" from the side of the door and 1/5 from the door's height.
2. Insert the hinge cup into the hole you just drilled. Make sure it fits securely.
3. Secure the hinge cup in place by using the provided screws. Make sure to tighten them properly.
4. Next, you will need to install the mounting plates. Each hinge comes with two mounting plates. Position the mounting plates on the cabinet frame where you want the door to be attached.
5. Use the provided screws to secure the mounting plates to the cabinet frame. Make sure they are tightened securely.
6. Once the mounting plates are installed, you can attach the hinge arms to the mounting plates. The hinge arms should fit into the mounting plates easily.
7. Finally, attach the hinge cup cover and hinge arm cover to the hinge cup and hinge arm respectively. These covers help to provide a clean and finished look to the hinge.
That's it! Your should now be properly installed. If you have any further questions or need additional assistance, you can contact Richelieu America Ltd's customer service at the following address:
Richelieu America Ltd
Customer Service
6350 Church Road
Hanover Park IL 60133
UNITED STATES
You can also visit their website at www.richelieu.com for more information.
Add New Comment