User Manual Q&AAnswer
Apr 19, 2025 - 04:58 AM
To switch the camera mode on the ZOSI V2.C.06.Z 4-in-1 Security Camera, you can use the OSD (On-Screen Display) button on the camera. Here are the steps to switch the camera mode:
1. Power on the camera.
2. Press the OSD button on the camera.
3. The OSD menu will appear on the screen.
4. To switch to AHD mode, press and hold the Left button on the OSD menu for 5 seconds.
5. To switch to TVI mode, press and hold the Right button on the OSD menu for 5 seconds.
6. To switch to CVBS mode, press and hold the Upward button on the OSD menu for 5 seconds.
7. To switch to CVI mode, press and hold the Downward button on the OSD menu for 5 seconds.
After switching the camera mode, check if the video display appears on your monitor. If not, you may need to adjust the camera mode further. You can try pressing the OSD buttons in sequence (Left, Right, Upward, Downward) for 5 seconds each until the signal matches your DVR.
Please note that it is important to ensure that the camera mode matches your DVR's video mode for proper compatibility and video display.
For more detailed instructions and troubleshooting tips, please refer to the ZOSI V2.C.06.Z 4-in-1 Security Camera Instruction Manual.
Add New Comment