How do I assemble and detach the ILIFE EASINE W100 Cordless Wet and Dry Vacuum Cleaner? (ILIFE EASINE W100 Cordless Wet and Dry Vacuum Cleaner User Manual)

Answer

manuals.plus

Apr 19, 2025 - 03:46 AM


To assemble the ILIFE EASINE W100 Cordless Wet and Dry Vacuum Cleaner, follow these steps:

1. Disassembly and assembly of handle:
   - Assembly: Insert the connecting pipe of the handle into the machine body assembly port until you hear a "click" sound.
   - Disassembly: Use a screwdriver or a tool of the right size to insert it into the hole in the upper back of the machine body. Press it while lifting the handle upward.

2. Assembly of clean water tank:
   - Open the cover of the clean water tank and fill it with clean water.
   - Install the clean water tank by aligning it with the machine body and pushing it until you hear a "click" sound.

3. Assembly of dirty water tank:
   - Put the bottom of the dirty water tank at the opening of the machine body and gently push it inward until you hear a "click" sound.

4. Assembly of the roller brush:
   - Align the groove on the right side of the roller brush with the transmission shaft.
   - Press down the left side of the roller brush until it is assembled in place.

5. Assembly of the transparent window of the roller brush:
   - Lock the buckle under the transparent window cover of the rolling brush.
   - Lock the latch to the ground brush until you hear a "click" sound.

To detach the ILIFE EASINE W100 Cordless Wet and Dry Vacuum Cleaner, follow the reverse steps of the assembly process.

Please refer to the user manual for visual illustrations and further details on the assembly and detachment process.