User Manual Q&AAnswer
Apr 19, 2025 - 03:44 AM
To pair the BASS JAXX Miro True Wireless Earbuds with your mobile device, please follow these steps:
1. Keep the distance between the earbuds and mobile device within 32.8 feet.
2. Deactivate the Bluetooth function on your mobile device.
3. Remove the protective stickers from the earbuds and put them back into the charging case.
4. Take both earbuds out from the charging case and wait for 3 to 5 seconds for auto pairing. The earbud indicator will blink in blue quickly. If the indicator seems off, please check carefully from any angle. If it is really turned off, place it in the charging case and repeat the pairing process. The other earbud's indicator will blink in blue slowly when auto pairing is done successfully.
5. Activate the Bluetooth function on your mobile device and select "MIRO TWS" from the list shown.
6. After pairing is successful, both earbuds will start blinking slowly in blue.
If the auto pairing is not successful, manual pairing between earbuds is essential. Please follow these additional steps:
1. Make sure the earbuds are charged.
2. Deactivate the Bluetooth function on your mobile device (if you had been paired the earbuds to some other mobile device(s) nearby, please make sure to deactivate those devices too).
3. Power on both earbuds simultaneously by pressing the On/Off buttons for 3 seconds and wait for 3 to 5 seconds for auto pairing. (Keep the Bluetooth function off on your mobile device before this operation.)
4. Activate the Bluetooth function on your mobile device and select "MIRO TWS" from the list shown.
5. After pairing successfully, both earbuds will start blinking slowly in blue.
Please refer to the for more detailed information and troubleshooting steps.
Add New Comment