User Manual Q&AAnswer
Apr 19, 2025 - 03:37 AM
To clean the fri-jado MDD Multi Desk Display, follow these steps:
1. Daily Cleaning:
- Clean the inside of the unit with hot water and a suitable cleaner.
- After cleaning, wipe the inside with a clean wet cloth to remove any residual detergent. Make sure all detergent is properly removed.
2. Weekly Cleaning:
- Clean the outside of the unit with a small amount of hot water and a mild cleanser, using a soft brush or sponge.
- After cleaning, dry the outside with a cloth.
- Treat all cleaned surfaces with a suitable antibacterial agent.
- Rub dry with a soft cloth or a paper towel.
3. Cleaning Glass Panes:
- To clean the top glass pane (3 level models), lift and hold the top glass while cleaning the top glass pane.
- To clean the top air guides (3 level models), lift and hold up the top glass pane throughout the process. The air guide pane can be removed for cleaning by applying a light amount of torsion. After cleaning, place the air guide pane back by applying some light torsion.
- To clean the side double-glass pane (all models), slide the double glass pane towards the front along the top and bottom guiding rails. The side pane can be removed from the unit once it has slid in its entirety past the top guide. Clean the pane and then slide it back into the rails.
Note: Never use a water hose for cleaning as water can seep into the unit through the ventilation holes. Disconnect the appliance from the power supply during cleaning or maintenance. For more details and instructions, refer to section 5 of the fri-jado MDD Multi Desk Display User Manual.
Add New Comment