User Manual Q&AAnswer
Apr 19, 2025 - 03:15 AM
To install the QAZQA Drun CL LED Ceiling Light, please follow these steps:
1. Ensure that the power supply is turned off before starting the installation process.
2. Attach the ceiling plate to the ceiling using the provided screws and anchors. Make sure the plate is securely fastened.
3. Connect the wires from the ceiling to the corresponding wires on the ceiling plate. Match the colors of the wires (usually black to black and white to white) and use wire connectors to secure the connections.
4. Carefully attach the LED module to the ceiling plate. Align the module with the designated slots on the plate and gently push it into place until it clicks.
5. Once the LED module is securely attached, turn on the power supply and test the light. If the light does not turn on, double-check the wiring connections and ensure that the power supply is functioning properly.
Please note that these are general installation instructions. It is always recommended to refer to the specific instruction manual provided with the product for detailed installation steps and any additional precautions or requirements.
For further assistance or troubleshooting, you can visit the QAZQA website at www.QAZQA.COM or contact their customer support.
Add New Comment