User Manual Q&AAnswer
Apr 19, 2025 - 02:37 AM
To switch between the different power sources on the WORKSiTE CAP328 Inflator and Deflator, you need to use the power switch located on the unit. The power switch has three positions: 12V DC/20V BATTERY/120V AC.
To use the 12V DC power source, make sure the unit is turned off and insert the cigarette plug into the car's cigarette lighter socket. Then press the power switch into the down position.
To use the 20V BATTERY power source, make sure the unit is turned off and insert the 20V battery into the designated slot. Then press the power switch into the down position.
To use the 120V AC power source, make sure the unit is turned off and insert the 120V AC power cord into a grounded 120V AC outlet. Then press the power switch into the up position.
Please refer to the instruction manual for more detailed information and safety precautions when using different power sources.
Add New Comment