User Manual Q&AAnswer
Apr 19, 2025 - 02:28 AM
Sure! Here are the installation instructions for the OPT7 2007-2014 White LED DRL Projector Headlights:
1. Open the hood of your Chevy Silverado.
2. Locate the 8 points marked in step 1 and remove the plastic fasteners (8x) from the filler panel.
3. Remove the filler panel.
4. Remove the 10mm bolts (4x) from the grille as shown in step 2.
5. Release the front grille by releasing the retaining clips (6x).
6. Remove the 10mm bolts (2x) from the OEM headlight as shown in step 4.
7. Open the fender liner by removing the 10mm bolt (1x).
8. Find the last 10mm bolt (1x) and remove it as shown in step 6.
9. Release the OEM headlight and disconnect the headlight harness.
10. Reattach the electrical connectors to the new headlight housing as shown in step 8.
11. Ensure that the wires are tied up securely and organized, keeping them away from any metal surface.
12. Line up the headlight housing mounting tabs and push rearward to seat it in place as shown in step 9.
13. Reinstall the 10mm bolts (4x) to secure the new headlight.
14. Test all functions of the headlights before tightening all bolts and screws.
15. Finally, restore other components (including the grille and filler panel) to their factory settings.
Please note that OPT7 Lighting is not liable for any damages or personal injuries that may occur during the installation process. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, it is recommended to seek professional assistance. The product comes with a 60-day warranty starting from the order date.
Add New Comment