User Manual Q&AAnswer
Apr 19, 2025 - 02:25 AM
To install the UVAS LED Bathroom Mirror Lighting and Defogger, please follow these steps:
1. Placement: Select the desired position for the mirror and level it. Mark the location for installation.
2. Support Location: Measure the hanging bar holes on the mirror and mark the drilling locations on the wall. Ensure that the markings are leveled.
3. Install Screws: Use a drill to make holes on the solid wall and insert the supplied plugs. Tighten the screws into the hanging bar holes securely.
4. Power Off: Before connecting the mirror wires, turn off all power to ensure safety.
5. Connection: Use a wire connector to connect the mirror to an external power supply. Guide the power supply wires into the junction box. Strip the wires to a suitable length, but do not connect the hardwire to a plug and socket outlet.
6. Turn on the Power: Hang up the mirror stably and then turn on the power.
7. Final Assembly: The mirror features a Defogger Switch and a Dimmer Switch. The left touch sensor controls the ON/OFF function of the defogger (the defogger power will automatically turn off after an hour). The right touch sensor controls the ON/OFF function of the lighting. Quick tap-tap the right touch sensor twice to change the light temperature from 3000K to 4000K to 6000K. Hold the right touch sensor to control the brightness.
8. Operation: Touch the sensor button to turn ON the light. Quick tap-tap twice to change the light temperature. Touch and hold the Light ON sensor button to dim the light. Release the button when the desired brightness is reached. Touch the sensor button to turn OFF the light. The mirror has a memory feature to preserve the previous brightness setting.
Please note that it is important to follow all safety instructions and have the installation done by a qualified licensed electrician. For further details and specifications, please refer to the UVAS LED Bathroom Mirror Lighting and Defogger Installation Guide.
Add New Comment