User Manual Q&AAnswer
Apr 19, 2025 - 02:03 AM
To zero the scale on the RICE LAKE LaserLight3 Large-Display Weight Indicator, follow these steps:
1. Make sure the scale is in Gross mode.
2. Remove all weight from the scale and wait for the display to show "<0>".
3. Press the "Zero" button. The display will show "0" to indicate that the scale has been zeroed.
Please note that the scale should be at standstill and the amount of weight to be removed should be within the specified zero range for the zeroing process to be successful. The default zero range is 1.9% of the full scale, but it can be configured for up to 100% of the full scale.
Add New Comment