User Manual Q&AAnswer
Apr 19, 2025 - 01:16 AM
To pair the VIRONE WB-1 Wireless Battery-Free Switch with the receiver, follow these steps:
1. Enter pairing mode on the receiver:
- Press and hold the receiver control button for approximately 3 seconds until the LED on the receiver starts flashing.
- Alternatively, within 5 seconds of turning on the receiver, press the switch (transmitter) 3 times. The LED on the receiver should start flashing.
2. Confirm pairing:
- Press the switch (transmitter) briefly to confirm pairing.
Note: If no action is taken within 30 seconds of entering pairing mode, the device will automatically exit pairing mode.
For more information and detailed instructions, please refer to the VIRONE WB-1 Wireless Battery-Free Switch With Receiver User Manual.
Add New Comment