User Manual Q&AAnswer
Apr 18, 2025 - 11:23 AM
To adjust the stopwatch hands position on your TW STEEL VD54 Smartwatch, follow these steps:
1. Check the type of crown on your watch. There are two types: a normal crown and a xxxx -lock type crown.
2. If the stopwatch is functioning, pull out the crown and press either button A or B to reset the stopwatch second and minute hands to the "0" position. The second hand will stop immediately. Pressing button A will reset the hands in a counter-clockwise direction, while pressing button B will reset them in a clockwise direction.
3. If the stopwatch is stopped, simply pull out the crown and press button B to reset the hands to the "0" position.
4. If the split time is displayed, pull out the crown and press button B, then button A, and finally button B again to reset the hands to the "0" position.
5. Once you have adjusted the hands, push the crown back to its normal position.
Please note that it is important to handle the crown and buttons carefully to avoid any damage to the watch.
Add New Comment