User Manual Q&AAnswer
Apr 18, 2025 - 09:22 AM
To change the application tool on the BOSCH PMF 350 CES Multifunction Tool, follow these steps:
1. Ensure that the power tool is unplugged from the socket before starting any work.
2. Open the AutoClic lever located on the power tool by pushing it all the way.
3. The current application tool/accessory will be ejected. Remove it from the power tool.
4. Place the new application tool (e.g., plunge cut saw blade, sanding plate, segment saw blade) on a level surface with the depressed center facing down.
5. Turn the application tool to a position that is convenient for the job at hand.
6. Press the power tool onto the application tool at the required angle until it audibly engages.
7. Check that the application tool is securely seated. It should be attached correctly and fixed in place to prevent it from coming loose during operation.
It is important to note that the BOSCH PMF 350 CES Multifunction Tool is compatible with various application tools, and the specific tool needed will depend on the task you are performing. Always refer to the user manual for the appropriate application tools and their usage instructions.
Add New Comment