User Manual Q&AAnswer
Apr 18, 2025 - 07:56 AM
To install the CREATE Electric Tower Rack, please follow these steps:
1. Before installation, ensure that the control panel is located at the bottom of the product.
2. Place the appliance at least 60 cm away from a bathtub or shower.
3. The appliance should be positioned at least 15 cm from the ceiling and 15 cm from the floor.
Installation Steps:
1. Mark on the wall the 4 holes to be made with the drill. The horizontal separation between the holes should be 450 mm, and vertically 745 mm.
2. Once the holes are marked, drill the 4 holes with an 8 mm diameter.
3. Detach the wall brackets as shown in the image.
4. Insert the plug into the wall hole, then attach the outer accessory to the wall brackets and use the wall xxxx to fix the accessory properly. Repeat this step for the remaining holes.
5. Fix the internal accessories and the 4 front accessories to the towel rack with the screws, then attach the decorative cover so that the xxxx is not visible.
6. Once the accessories are attached to the towel rack, insert the internal accessories into the external ones on the wall, adjust the distance as desired, and fix the fixing screws to ensure it is securely in place.
Please refer to the assembly instructions in the manual for visual illustrations and additional details.
Add New Comment