How do I adjust the time and date on my TW Steel Ronda Movement watch? (TW STEEL Ronda Movement Owner's Manual)

Answer

manuals.plus

Apr 18, 2025 - 06:34 AM

To adjust the time on your TW Steel 5030.D Ronda Movement watch, follow these steps:

1. Pull out the crown to position III (the watch stops).

2. Turn the crown until you reach the correct time.

3. Push the crown back to its normal position (position I).

Note: To set the time to the exact second, the crown must be pulled out when the second hand is in the position of "60". Once the hour and minute hands have been set, push the crown back into position I at the exact second.

To set the date in quick mode, follow these steps:

1. Pull out the crown to position II (the watch continues to run).

2. Turn the crown until the correct date appears.

3. Push the crown back into position I.

Note: During the date changing phase between approximately 9 PM and 12 PM, the date must be set to the date of the following day.

If you need to adjust the date and time following a battery change, follow these steps:

1. Pull out the crown to position II (the watch continues to run).

2. Turn the crown until yesterday's date appears.

3. Pull out the crown to position II (the watch stops).

4. Turn the crown until the correct date appears.

5. Continue to turn the crown until the correct time appears.

6. Push the crown back into position I.

Note: To set the watch to the exact second, refer to the chapter entitled "Setting the time". Also, observe the AM/PM clock rhythm.

For further information on using the chronograph function and adjusting the chronograph hands to the zero position, please refer to the manual provided with your TW Steel 5030.D Ronda Movement watch.