User Manual Q&AAnswer
Apr 18, 2025 - 06:32 AM
To adjust the temperature set point on the UNIWATT UTE202NP thermostat, follow these steps:
1. Press the top button to increase the set point temperature or the bottom button to decrease it. The set point can be adjusted in increments of 0.5°C (1°F).
2. To quickly scroll through the set point values, press and hold down the button.
3. The minimum set point is 3°C (37°F), and the maximum set point is 30°C (86°F).
4. When you press a button, the current set point is shown and the display flashes.
5. To turn off the thermostat, lower the set point below 3°C (37°F). The set point value displayed will be "--.-", and the heating system will not start up.
Note: The temperature set point can be displayed in either degrees Celsius or Fahrenheit. To switch between the two, simultaneously press down both buttons for 3 seconds. The °C or °F symbol will flash, and you can switch between Celsius and Fahrenheit by pressing the top button. Once the adjustment is completed, release the buttons and wait for 5 seconds to exit the adjustment function.
Please refer to the UNIWATT UTE202NP Non Programmable Electronic Thermostat User Guide for more detailed instructions and illustrations.
Add New Comment