User Manual Q&AAnswer
Apr 18, 2025 - 05:25 AM
To connect and monitor the MSI MEG Ai1300P PCIE5 or MEG Ai1000P PCIE5 Power Supply Unit, follow these steps:
1. Connect the power supply unit to your system using the appropriate power connectors. The power connectors and their quantities are as follows:
- ATX12V (Motherboard) 20+4 pin: 1 connector
- 12VHPWR 16pin: 1 connector
- EPS12V (CPU) 4+4 pin: 1 connector
- EPS12V (CPU) 8 pin: 1 connector
- PCIe (VGA) 6+2 pin: 8 connectors
- SATA 15 pin: 16 connectors for Ai1300P PCIE5, 12 connectors for Ai1000P PCIE5
- Peripheral (PATA) 4 pin: 4 connectors
- FDD 4 pin: 1 connector
- JUSB 9 pin: 1 connector
- USB Type A: 1 connector
2. If you want to monitor the PSU performance, you can connect your system to the G.I. port using either a Mini USB to 9-Pin Cable or a Mini USB to Type-A Cable. This will allow you to monitor the power supply unit's performance through the MSI Center.
3. Once the connection is established, you can control and monitor the power supply unit's performance through the MSI Center software. To download and install the MSI Center, refer to the "Software Control and Monitoring" section of the user guide. You can download the MSI Center User Guide from this link: http://download.msi.com/manual/mb/MSI... or scan the provided QR code.
By following these steps, you can connect and monitor the MSI MEG Ai1300P PCIE5 or MEG Ai1000P PCIE5 Power Supply Unit using the MSI Center software.
Add New Comment