User Manual Q&AAnswer
Apr 18, 2025 - 05:18 AM
To change the brightness of the GIRA 2361 00 Light Signal, please follow these steps:
1. Ensure that the mains voltage is switched off before starting any work.
2. Remove the lamp cover from the light signal.
3. Carefully remove the flush-mounted insert from the appliance box, ensuring that the cables are properly insulated according to regulations.
4. Switch on the mains voltage.
5. Use the switch connected to the light signal to turn it on.
6. Adjust the brightness by turning the adjuster located on the flush-mounted insert.
7. Once the desired brightness is achieved, switch off the mains voltage.
8. Mount the flush-mounted insert back into the appliance box, ensuring that the terminals are at the bottom.
9. Fit the lamp cover back onto the light signal.
10. Switch on the mains voltage again.
Please note that this work must be carried out by an electrician as it involves working with mains voltage, which can be dangerous. Always use insulated tools and follow safety precautions to prevent electric shock.
For further information or assistance, please refer to the GIRA 2361 00 Light Signal Instruction Manual.
Add New Comment