How do I install the Paul Neuhaus SELINA LED Pendant Light? (Paul Neuhaus SELINA LED Pendant Light Instruction Manual)

Answer

manuals.plus

Apr 17, 2025 - 05:50 AM


To install the Paul Neuhaus SELINA 835110 LED Pendant Light, please follow these steps:

1. Before starting the installation, ensure that the power supply is switched off.

2. Determine the desired location for the pendant light and mark the spot on the ceiling where you want to install it.

3. Use a suitable drill bit to create a hole in the ceiling at the marked spot. The size of the hole should be appropriate for the mounting bracket included with the pendant light.

4. Insert the mounting bracket into the hole and secure it to the ceiling using screws or other suitable fasteners. Make sure the bracket is firmly attached and level.

5. Connect the electrical wires from the pendant light to the corresponding wires in the ceiling. Follow the wiring diagram provided in the instruction manual or consult a qualified electrician if you are unsure about the wiring connections.

6. Once the wiring is properly connected, attach the pendant light to the mounting bracket. Ensure that it is securely fastened.

7. Finally, switch on the power supply and test the pendant light to ensure it is working correctly.

Please note that these instructions are a general guideline, and it is always recommended to refer to the specific installation instructions provided with the product. If you encounter any difficulties during the installation process, it is advisable to seek assistance from a professional electrician.