User Manual Q&AAnswer
Apr 17, 2025 - 05:49 AM
To install the perimeter boundary system for the YARD FORCE XPower 400 Cordless Robotic Mower, please follow the instructions below:
1. Before installation, carefully read and understand the instructions provided in the manual.
2. Start by planning the layout of the perimeter boundary. The boundary wire should enclose the area you want the robotic mower to operate within.
3. Clear the area of any debris, stones, sticks, or wires that could interfere with the installation or operation of the mower.
4. Lay out the boundary wire along the desired perimeter. The wire should be placed approximately 4-6 inches away from any obstacles such as fences, trees, or flower beds.
5. Use the included pegs to secure the boundary wire to the ground. Place the pegs at regular intervals, approximately 3-5 feet apart.
6. When connecting the boundary wire, make sure to follow the instructions provided in the manual. Use the included connectors to join the wire ends securely.
7. Once the boundary wire is installed, connect it to the docking station of the robotic mower. Follow the instructions provided in the manual for the specific connection method.
8. Test the perimeter boundary system by placing the robotic mower near the wire and ensuring that it stops when it reaches the boundary.
9. Adjust the boundary wire or reposition the pegs if necessary to ensure proper operation of the robotic mower.
Please note that these instructions are a general guideline. For detailed and specific instructions, refer to the manual provided with the YARD FORCE XPower 400 Cordless Robotic Mower.
Add New Comment