User Manual Q&AAnswer
Apr 17, 2025 - 05:48 AM
To achieve the best results with the REVAMP DR-1850 Progloss Perfect Blow Dry, follow these steps:
1. Wash and condition your hair as normal.
2. Squeeze out excess moisture with a towel.
3. Apply heat protection spray if required.
4. Plug the product into a 220-240V mains power supply.
5. Turn on the hairstyle by using the temperature/speed control ring at the bottom of the handle. Align it with the desired temperature/speed setting.
6. The hairstyle has 3 heat/speed settings (High, Low, and Cool) for precise heat styling for all hair types.
- Cool: The airflow is powerful and cool.
- Low: The airflow is low and warm.
- High: The airflow is powerful and hot.
7. Roughly section your hair prior to styling. Style the lower layers first.
8. Style each hair strand from top to bottom to get the best results. Use the rotating cool tip for extra comfort while styling.
9. To turn the product off, simply align the control ring with the "OFF" setting.
10. After use, unplug the product and allow it to cool before storing away.
Please note that regular use of styling products may deteriorate the surface coating over time. Avoid scratching the surface of the product, as this will affect its effectiveness. Also, be cautious when using the product as it reaches a high temperature during operation. Keep it away from the scalp and skin to avoid burns.
For cleaning and maintenance, switch off the appliance, unplug it, and allow it to cool fully before cleaning. Wipe over all surfaces using a soft damp cloth, and do not use harsh abrasives or cleaners. Remove any loose hairs from the bristles after every use and ensure there is no product buildup on the ceramic barrel or bristles. Do not immerse the appliance in water or any other liquid. Store the product in a cool dry place and avoid wrapping the cord tightly around it.
If you have any further questions or concerns, refer to the user manual or contact REVAMP customer service for assistance.
Add New Comment