User Manual Q&AAnswer
Apr 17, 2025 - 05:08 AM
Installing the countertop and sink on the HANOVER Tremont 24 Inch Bathroom Vanity Set is a straightforward process. Here are the steps to follow:
1. Start by ensuring that the cabinet is fully assembled and in its desired location in your bathroom.
2. Place the pre-assembled countertop onto the cabinet, aligning it properly. The countertop should fit snugly onto the cabinet.
3. Once the countertop is in place, attach it to the cabinet using the provided screws or brackets. These should be included in the packaging.
4. Next, position the white ceramic basin onto the pre-drilled hole on the countertop. Ensure that it is centered and aligned properly.
5. To secure the basin, you will need to attach the drain. Insert the drain into the pre-drilled hole on the basin and tighten it securely.
6. If you are using a faucet, make sure it is compatible with a 4" faucet spread. Install the faucet according to the manufacturer's instructions, following the pre-drilled holes on the countertop.
7. Once the countertop, basin, drain, and faucet are securely in place, attach the decorative doorknobs to the cabinet doors. These should be included in the packaging as well.
8. Finally, check all connections and ensure that everything is properly tightened. Test the faucet and drain for any leaks.
Please note that this vanity set does not include a faucet, drain, or plumbing hardware, so you will need to purchase those separately.
For more detailed instructions or any additional information, please refer to the instruction manual provided with the HANOVER Tremont 24 Inch Bathroom Vanity Set.
Add New Comment