User Manual Q&AAnswer
Apr 17, 2025 - 03:16 AM
To adjust the cam for lifting/lowering on the Hard Head 022279 Pallet Truck, follow these steps:
1. Undo the lock nut on the side of the pump using a 14 mm spanner.
2. Use a slotted head screwdriver to adjust the xxxx .
3. Once the desired adjustment is made, tighten the lock nut.
Please refer to Figure 17 in the user manual for a visual representation of this process.
It is important to note that if you are experiencing any issues with the lifting or lowering function of the pallet truck, such as the forks not lifting or dropping after lifting, it is recommended to check other potential causes mentioned in the troubleshooting section of the manual. If the problem persists, it is advisable to contact an authorized service center for further assistance.
Add New Comment