User Manual Q&AAnswer
Apr 17, 2025 - 03:13 AM
To connect the GLADIUS Mini S Underwater Drone to your mobile phone or tablet, follow these steps:
1. Install the CHASING GO1 App: Scan the QR code provided in the user manual or visit the iOS App Store/Google Play to download the CHASING GO1 App. Make sure your mobile phone or tablet meets the minimum requirements (iOS 9.0/Android 4.4 and above).
2. Connect the ROV and remote controller: Insert the two ends of the tether cable into the ROV and remote controller and tighten the fastening nuts. Check if the O-ring on the tether cable socket is missing or damaged and replace it if necessary.
3. Turn on the ROV: Turn on the power switch (ON/OFF) of the remote controller. The battery indicator and the ROV indicator light will turn on without flashing. The LED auxiliary light on the ROV will briefly light up, accompanied by two self-test sounds. Note that the machine should only be unlocked and placed in water when everything is ready.
4. Connect the remote controller and mobile phone/tablet: There are two connection methods. The recommended method is to use a cable. Connect the included remote controller cable to the remote controller and the mobile phone/tablet (use the cable that corresponds to the port on the mobile device), and connect the end with the mobile phone graphic to the mobile phone/tablet.
Note:
- If your mobile phone/tablet does not successfully connect, try turning off your mobile phone/tablet's Wi-Fi first. If it still doesn't connect, turn off your mobile phone/tablet's cellular data connection.
- If none of the above methods work, it may be a compatibility issue with your mobile phone/tablet. Try using the second method, "Wi-Fi Connection."
- The remote controller's Type-C port and the included remote controller cable do not support charging.
Once connected, you can open the CHASING GO1 App and tap the "Enter Camera" button to access the real-time image transmission from the GLADIUS Mini S Underwater Drone.
Add New Comment