User Manual Q&AAnswer
Apr 17, 2025 - 02:35 AM
To mount the HINKLEY 3640 Lighting Harper 3 Light fixture, follow these steps:
1. Find a clear area in which you can work.
2. Unpack the fixture and glass from the carton.
3. Carefully review the instructions prior to assembly.
4. Attach the mounting strap to the junction box by installing screws (A) into the mounting plate (B). Ensure that the holes into which the screws are threaded match the spacing of the holes (C) in the canopy (D).
5. Attach the mounting plate (B) to the junction box (J) using screws (G) (not provided) and slip the supply wires through the large center hole.
6. Hang the fixture by slipping screws (A) through the holes (C) of the canopy (D).
7. Thread on the barrel knobs (E) onto the ends of screws (A) and tighten them to secure the fixture to the ceiling.
8. Lamp the fixture before installing the glass.
9. To assemble the glass, use hex nuts (H) to secure the glass arms (Z) to the canopy.
10. Lift the glass towards the canopy (D).
11. Slide the center ring (R) over the glass.
12. Use the three knobs (K) to secure the glass (G) and ring (R) to the canopy (D).
13. The fixture can now be powered on.
Please note that these instructions are a summary of the steps provided in the HINKLEY 3640 Lighting Harper 3 Light Instruction Manual. For complete and accurate instructions, refer to the manual provided with the product.
Add New Comment