User Manual Q&AAnswer
Apr 16, 2025 - 01:51 AM
To install the MNC 55695 Thermo Vent Car Dehumidifier and Fan, follow these steps:
1. Choose a suitable location in your vehicle to position the fan heater. The surface must be smooth and even, without any grained surfaces.
2. Clean the surface and the underside of the fixture pedestal to remove dust and grease.
3. Combine the fixture pedestal and the housing by following the instructions in Figure 2 of the manual.
4. Pull the protective film from one side of the adhesive pad and place it onto the fixture pedestal, adhesive side down. Push firmly into place.
5. Remove the other protective film from the adhesive pad and firmly press the fan heater into the cleaned spot in your vehicle.
6. Lay the connection cable so that it does not hinder you when driving.
7. Plug the connector into the 12 V vehicle socket.
The MNC 55695 Thermo Vent Car Dehumidifier and Fan is now ready for operation. Please refer to the manual for further instructions on usage and safety precautions.
Add New Comment