User Manual Q&AAnswer
Apr 16, 2025 - 01:41 AM
To install the LUMASCAPE ERDEN E6 LS3062 Foundation In-ground luminaire, please follow these steps:
1. Ensure that you read and understand all safety instructions provided in the instruction manual. Failure to follow these instructions may void the warranty.
2. Make sure that the installation complies with all local electrical rules and regulations. It is recommended to have the electrical work performed by a licensed electrician.
3. Before installation, check that the protective shield of the luminaire is not cracked. If it is cracked, immediately stop using the luminaire, isolate the light source, keep it dry, and contact Lumascape for a replacement of the protective shield.
4. If the external flexible cable or cord of the luminaire is damaged, it should be exclusively replaced by Lumascape or their service agent to avoid any hazards.
5. The light source contained in the luminaire should only be replaced by Lumascape or their service agent.
6. Position the luminaire in a location where it will not pose a risk of prolonged staring into the operating light source. It is recommended to keep a distance of at least 26 feet (8 meters) from the luminaire.
7. Ensure that the mains input power is surge protected.
8. Never make or break connections while the circuit is energized.
9. Do not make any modifications or alterations to the product.
10. Keep the luminaire clean and free of debris. Only clean it with warm water and avoid using chemicals or abrasives, as this may void the product warranty.
11. Keep the connections clean and dry at all times.
12. The luminaire is suitable for use indoors or outdoors.
For more detailed instructions and information, please refer to the LUMASCAPE ERDEN E6 LS3062 Foundation In-ground Instruction Manual provided with the product.
Add New Comment