User Manual Q&AAnswer
Apr 16, 2025 - 12:41 AM
To prepare the artwork for the GoToTags Custom NFC Silicone Wristband Round Face, please follow these instructions:
1. Place all artwork elements in the "Customer Artwork" parent layer.
2. Do not modify the template in any way.
3. All elements, except for images, should be vector graphics.
4. Use high-quality images with a resolution of at least 300 dpi.
5. Embed images into the file; do not link them.
6. Lines should be 0.5 pt or thicker.
7. Do not include a line or border around the artwork edge, as it may not look good.
8. Convert text to outlines, unless it's variable text. This is required if using non-standard fonts.
9. Text should generally be 7 pt or higher to ensure readability.
10. For variable elements like text or barcodes, provide an example (position, size, font...) in the "Variable Elements" layer.
11. Barcodes must have a border of white "quiet zone" to be scannable. Black barcodes work best.
12. If using PMS colors, include the PMS color code in the layer name.
13. Do not flatten layers before saving.
14. Edit and save the file in the existing CMYK color mode.
15. Save the file in Adobe Illustrator format (.ai) with "PDF Compatible" enabled.
Please note that these instructions are specific to artwork preparation. For printing lines, such as bleed, trim, and safe areas, please refer to the manual for detailed guidelines.
For additional information about artwork and printing, you can visit the GoToTags Store's help site at: https://learn.gototags.com
If you have any further questions or need assistance, feel free to ask.
Add New Comment