User Manual Q&AAnswer
Apr 16, 2025 - 12:30 AM
To install the EMKO PROOP Input or Output Module, please follow the steps below:
1. Mounting on the Prop device:
- Insert the PROOP I/O Module into the holes of the Prop device.
- Check that the locking parts are plugged into the PROOP-I/O Module device and pulled out.
- Press the PROOP-I/O Module device firmly in the specified direction.
- Insert the locking parts by pushing them in.
2. Mounting on DIN-Rail:
- Drag the PROOP-I/O Module device onto the DIN-rail.
- Check that the locking parts are plugged into the PROOP-I/O Module device and pulled out.
- Insert the locking parts by pushing them in.
3. Make the necessary connections:
- Connect the power supply to the module using the terminal marked with "+" and "-".
- Connect the communication link with the HMI device using terminals A, B, and GND.
- Connect the digital inputs, digital outputs, analog inputs, and analog outputs to their respective terminals following the connection scheme provided in the manual.
Please refer to the "Mounting of Module on Prop Device" and "Mounting of Module on DIN-Ray" sections in the user manual for visual instructions on how to install the module.
Add New Comment