User Manual Q&AAnswer
Apr 16, 2025 - 12:25 AM
To match the remote control with the LED controller, you have two options:
Option 1: Use the controller's Match key
1. Press the Match key on the LED controller (the Match key is located on the controller).
2. Immediately press the on/off key on the remote control.
3. The LED light on the controller should blink, indicating that the match is successful.
To delete all matched remotes:
1. Press and hold the Match key on the LED controller for 5 seconds.
2. The LED light on the controller will blink 5 times, indicating that all matched remotes have been deleted.
Option 2: Use Power Restart
1. Switch off the power to the LED controller.
2. Switch on the power to the LED controller.
3. Repeat steps 1 and 2.
4. Immediately press the on/off key on the remote control three times.
5. The LED light on the controller should blink 3 times, indicating that the match is successful.
To delete all matched remotes:
1. Switch off the power to the LED controller.
2. Switch on the power to the LED controller.
3. Repeat steps 1 and 2.
4. Immediately press the on/off key on the remote control five times.
5. The LED light on the controller will blink 5 times, indicating that all matched remotes have been deleted.
Please make sure to follow the instructions carefully and ensure that the remote control is within the controllable distance of the LED controller. If you are still experiencing issues, please refer to the troubleshooting section in the manual or contact the supplier for further assistance.
Add New Comment