User Manual Q&AAnswer
Apr 16, 2025 - 12:01 AM
To connect the SUNDRAX PGS-3-4DE PowerGate DMX Transceivers to your DMX-controlled equipment, follow these steps:
1. Visually inspect the device to ensure there are no transportation damages.
2. Connect the first device in transmitter mode to the DMX signal source.
3. Connect the second device in receiver mode to your DMX-controlled equipment.
4. Connect the AC power cable of the device to a power outlet in the network segment selected for work. Make sure there are no reactive components such as transformers or surge protectors between the power sockets of the transmitter and receiver.
5. Switch on the power. The device will start normal operation immediately.
Before mounting and powering up, it is important to verify protective earthing and cable connections for safety purposes.
Please refer to the SUNDRAX PGS-3-4DE PowerGate DMX Transceivers User Manual for more detailed instructions and illustrations.
Add New Comment