User Manual Q&AAnswer
Apr 15, 2025 - 11:50 PM
To install the JONSBO TW7-240 Integrated Water Cooling system, please follow these steps:
Step 1: Applying thermal paste/Remove the protection film
- Apply thermal paste onto the CPU surface before installing the cooler.
- Remove any protective film from the cooler if present.
Step 2: Installing the Intel/AMD bracket
- Depending on your CPU type, install either the Intel or AMD bracket provided in the package.
Step 3: Tightening screws diagonally
- For Intel LGA 115X/1200/1700: Secure the cooler by tightening the screws diagonally.
- For Intel LGA 2011: Remove the AMD original retention plastic brackets and secure the cooler by screwing in the provided studs.
- For AMD: xxxx in the AMD studs and secure the cooler.
Step 4: Connecting the cables
- Connect the 3-pin connector from the pump unit to the AIO/PUMP socket on the motherboard.
- Connect the 4-pin fan PWM connector to the CPU_FAN socket on the motherboard.
- Connect the 5V ARGB LED socket on the motherboard for RGB lighting (if applicable).
Step 5: Securing the fans and radiator
- Secure the fans and radiator to the case using the provided case screws.
Please refer to the JONSBO TW7-240 Integrated Water Cooling User Manual for more detailed instructions and illustrations.
Add New Comment