User Manual Q&AAnswer
Apr 15, 2025 - 11:48 PM
To install the falmec Ceiling hood STELLA WHITE 120 cm with a remote motor, follow these steps:
1. Perform preliminary operations: Cut the plasterboard and insert the supporting frame.
2. Fix the mandatory safety chains to the ceiling.
3. Open the panel and remove the filters.
4. Remove the flange from the motor. If the air outlet is upward, follow the instructions for upward installation. For other directions, follow the instructions provided.
5. Fix the motor support brackets.
6. Fit the non-return valve and position the motor on the support frame.
7. Fit the suction pipe and make the electrical connection.
8. Remove the flange from the hood and fix the brackets onto the rectangular connection.
9. Position the rectangular connection on the support frame and fit the suction pipe.
10. Fit the non-return valve and fix the suction pipe.
11. Pass the chains through and pass the control cable through.
12. Close the holding brackets.
13. Fix the motor (or rectangular connection), make the electrical connection, and tension the safety chains.
14. Reposition the filters and close the hood.
Please refer to the instruction manual for detailed diagrams and instructions specific to your installation type.
Add New Comment