User Manual Q&AAnswer
Apr 15, 2025 - 11:16 PM
To install the effeff 4042203195660 Single Part Cable Connector, please follow the steps below:
1. Start by preparing the door frame and door leaf for installation. Ensure that the surfaces are clean and free from any debris.
2. Identify the fixing caps included with the product. These fixing caps are used for mounting the cable connector on both the door frame and the door leaf.
3. Determine the appropriate fixing cap for your cable cross-section. The effeff 4042203195660 Single Part Cable Connector is designed for use with a cable cross-section of 7 mm.
4. Attach the fixing cap with the white metal tube to the door frame. Ensure that it is securely fixed in place.
5. Attach the fixing cap with the brass nickel-plated metal tube to the door leaf. Again, make sure it is firmly fixed.
6. Connect the cable from the door frame to the cable from the door leaf through the flexible metal hose provided. Ensure a secure connection.
7. Once the cable connector is properly installed, test the power transmission by opening and closing the door. Verify that the connection is stable and reliable.
If you require further assistance or encounter any issues during the installation process, please refer to the instruction manual provided with the product. It contains detailed diagrams and step-by-step instructions to guide you through the installation process.
Add New Comment