How do I install the VISION VFM-WA2X2/3 127cm TV Mount? (VISION TV Mount Instruction Manual)

Answer

manuals.plus

Apr 15, 2025 - 10:59 PM

To install the VISION VFM-WA2X2/3 127cm TV Mount, please follow the steps outlined in the installation instructions provided in the manual. Here is a step-by-step guide:

1. Start by identifying a suitable wall location for mounting the TV. Ensure that the wall can support the weight of the TV and the mount.

2. Use a stud finder to locate the studs in the wall. It is recommended to mount the TV to the studs for maximum stability. Mark the stud locations on the wall.

3. Attach the mounting plate to the back of your TV using the provided screws. Make sure to align the mounting holes on the TV with the holes on the mounting plate.

4. With the help of a second person, hold the TV against the wall at the desired height and mark the wall through the mounting holes on the mounting plate.

5. Remove the TV and use a drill to create pilot holes at the marked locations on the wall. Make sure to use an appropriate drill bit size for the wall material.

6. Attach the wall bracket to the wall using the provided screws. If mounting to studs, ensure that the screws are driven into the center of the studs for optimal support.

7. Once the wall bracket is securely attached, lift the TV and align the mounting plate with the wall bracket. Slide the TV downwards until it locks into place.

8. Use the provided locking screws to secure the TV to the wall bracket. Tighten the screws using a screwdriver or a suitable tool.

9. Double-check the stability of the TV mount by gently pushing and pulling the TV in different directions. If any movement is detected, recheck the installation and tighten any loose screws.

Please note that the above steps are a general guideline. It is essential to refer to the specific instructions provided in the VISION VFM-WA2X2/3 127cm TV Mount Instruction Manual for accurate and detailed installation information.