User Manual Q&AAnswer
Apr 15, 2025 - 10:53 PM
To install the ZEVNI A04644 24 Inch Wide Gold and Black LED Chandelier, follow these steps:
1. Ensure safety: Before starting any work, turn off the electricity by placing the main power switch and wall switch in the "OFF" position. This should be done at the main fuse or circuit breaker box in your home.
2. Prepare the mounting surface: The mounting surface should be clean, dry, flat, and strong enough to support the weight of the chandelier. It should also be 1/4" larger than the canopy on all sides. Correct any gaps exceeding 3/16" as necessary.
3. Check voltage and wattage: Make sure the voltage you are using is 120V, and the maximum wattage is 38W.
4. Avoid damaging the lamp: Keep the chandelier away from acidic and alkaline substances to prevent damage to its surface.
5. Replace bulbs safely: When replacing bulbs, turn off or unplug the chandelier and wait until it has cooled down, as bulbs can get hot quickly.
6. Follow safety instructions: The safety instructions provided in the manual are not exhaustive. Always exercise common sense, caution, and care when working with electrical products.
For detailed assembly and installation instructions, please refer to the user manual provided with the ZEVNI A04644 24 Inch Wide Gold and Black LED Chandelier.
Add New Comment