User Manual Q&AAnswer
Apr 15, 2025 - 10:46 PM
To connect the Panasonic CZ-TAW1 Aquarea Smart Cloud to the internet, you have two options: Ethernet mode (wired) or Wireless mode (wireless). Here are the steps for each mode:
Ethernet mode:
1. Turn on the power supply to the indoor unit.
2. Check that the Status LED is green, indicating that the Ethernet mode is on. If not, press and hold the Check switch for 10 seconds to switch to the Ethernet mode.
3. Connect the router and the adaptor with a LAN cable.
4. The Link LED will light up, indicating that the connection has been established. Make sure to use a shielded LAN cable for optimal performance.
Wireless mode:
1. Turn on the power supply to the indoor unit.
2. Check that the Status LED is blue, indicating that the Wireless mode is on. If not, press and hold the Check switch for 10 seconds to switch to the Wireless mode.
3. Enable WPS (Wi-Fi Protected Setup) on your router.
4. Press the WPS switch on the adaptor.
5. The Status LED and Link LED will light up when communication is established.
Please note that these instructions are a summary, and for more detailed information, it is recommended to refer to the full version Operating Instructions provided on the CD-ROM.
Add New Comment