User Manual Q&AAnswer
Apr 15, 2025 - 10:45 PM
To install the Kensington A1010 Telescoping Desk Stand, please follow these steps:
1. Start by unpacking the contents of the box and ensure that all parts are included.
2. Place the base of the desk stand on a stable and flat surface.
3. Extend the telescoping arm to the desired height by pulling it upward until it locks into place.
4. Attach the VESA plate to the back of your monitor or display using the provided screws. Make sure the plate is securely fastened.
5. Align the VESA plate with the mounting bracket on the telescoping arm.
6. Slide the VESA plate onto the mounting bracket until it clicks into place.
7. Use the provided Allen wrench to tighten the xxxx on the mounting bracket to secure the VESA plate.
8. Adjust the tilt angle of the monitor by loosening the tilt adjustment xxxx located on the side of the mounting bracket. Tilt the monitor to the desired angle and tighten the xxxx to secure it in place.
9. Connect any necessary cables to the back of your monitor.
10. Your Kensington A1010 Telescoping Desk Stand is now installed and ready to use.
For more detailed instructions and illustrations, please refer to the Kensington A1010 Telescoping Desk Stand Instruction Manual provided in the box or visit the support section of the Kensington website at www.kensington.com/support.
Add New Comment