User Manual Q&AAnswer
Apr 15, 2025 - 10:21 PM
To attach the fins to the Atomizer rocket, follow these steps:
1. Fine sand the balsa fin sheet with 400 grit sandpaper to make the surface smooth.
2. Carefully remove all the fins from the fin sheet using a sharp hobby knife.
3. Apply a coat of sanding sealer to the fins with a paintbrush and let it dry.
4. Repeat the sealing and sanding procedure until the fins look and feel smooth.
5. Using wood glue, attach the fins to the rocket along the lines drawn on the tube.
6. Make sure the aft edges of the fins are even with the aft edge of the body tube.
7. Check to ensure that the fins are perpendicular to the tube for straighter flights.
8. Allow the glue to dry completely.
By following these steps, you will be able to securely attach the fins to the Atomizer rocket.
Add New Comment